Rimu Recycled T & G Flooring – Otago

This flooring was machined from recycled timber (Wood Solutions - Dn) and is the remainder of a kitchen/dining room re-flooring project, due 100 years of borer. The boards contain some nail holes, knots and edge cuts but are in good overall condition and look great when laid. Lengths range 0.9 - 4m, with most above 1.8m and are 19mm thick. Amounts: 1. 114 linear metres of 85mm face cover - approx. 8.9m2 floor surface when laid 2. 48 linear metres of 65mm cover board - approx. 3.4m2 floor surface Photos show details of T & G and finish. Finish includes 1 coat of polyurethane, sanding with 230grit (hand), + finish with 2 coats of satin polyurethane. No commercial sanding needed: 1.Board ends (delivery), 2. Raw surfaces, 3. Finished floor – no sealer, 4. + Sealer, 5. Finished board details. Will deliver in Otago region if cost of trailer and fuel are covered.