Re-milled Native Rimu Flooring – 13 m², Machined in Dunedin

Re-milled native rimu flooring, machined by Wood Solutions Ltd (Dunedin) from recycled demolition timber and laid by Glen Summers Construction. This batch is a remainder from a villa re-flooring project, re-listed after shipping difficulties with a previous sale. The boards reflect their origin — occasional nail holes, knots, and light edge marks — but have a clean, smooth surface, are ready to lay and have a strong natural character when sealed. • No borer • No commercial sanding required Finish in photos is a result of a base coat, hand sand (230 grit), and two satin polyurethane coats. Larger holes were filled with rimu sawdust mixed with PVA glue before sealing. Dimensions & Quantities • 85 mm face cover: 123 linear m (˜ 10.25 m²) • 74 mm face cover: 38.3 linear m (˜ 2.74 m²) • Total: ˜ 13 m² floor coverage • Thickness: 19 mm • Lengths: 1.2 – 3.6 m (majority > 1.8 m) • Cut to 600 mm increments (1.2 / 1.8 / 2.4 / 3.0 / 3.6 m) The 74 mm boards are slightly lower grade (some holes / surface shake) but will present similarly once sealed. Photos show 1. Board ends at delivery 2. Unfinished 85 mm cover boards before laying 3. Floor prior to sealing 4. Finished floor (two-coat satin polyurethane) 5. Floor detail (finished) Delivery & Inspection Inspection welcome prior to purchase.